Brass Machine Screw, Pan Head, Phillips Drive, #2-56, 5/16" Length (Pack of 100)

!±8±Brass Machine Screw, Pan Head, Phillips Drive, #2-56, 5/16" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 28, 2012 05:30:39
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Quiet Exhaust Better Than Compare Hearts And Lips Pre-designed Acrylic/uv Gel Artificial/false French Nail ...

StarTech Replacement Screws - 15 Pack 15SCREW6_32

!±8± StarTech Replacement Screws - 15 Pack 15SCREW6_32

Rate : | Price : $1.99 | Post Date : Mar 24, 2012 20:37:02
Usually ships in 24 hours

This pack of 15 #6-32 x 1/4" long screws are handy for building, repairing, and maintaining computer systems.

• StarTech PC Mounting Computer Screws M3 x 1/4-Inches Long Standoff - 50 Pack SCREWM3
• StarTech 6-32 Brass Motherboard Standoffs for ATX Computer Case - 15 Pack STANDOFF632
• StarTech Round Head Replacement 6-32 Hard Drive Mounting Screws - 15 Pack SCREW632R15
• StarTech M3 x 1/4-Inches Long Screws - 15 Pack 15SCREWM3
• StarTech 18in SATA to Right Angle SATA Serial ATA Cable (SATA18RA1)

Hydro Grow Led Grand Sale Price Comparisons For Ipod Touch 100 For Sale Implementing Word Processing...

!±8± Stainless Steel 316 Machine Screw, Hex Head, #10-32, 1/2" Length (Pack of 25)

Brand : Small Parts | Rate : | Price :
Post Date : Mar 21, 2012 21:27:17 | Usually ships in 24 hours

Stainless Steel 316 Machine Screw, Hex Head, #10-32, 1/2" Length (Pack of 25)

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
• Hex head for easy driving
• Length is measured from under the head
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

More Specification..!!

Stainless Steel 316 Machine Screw, Hex Head, #10-32, 1/2" Length (Pack of 25)

Used Large 34" "it's A Boy" Baby Bottle Foil Balloon For Baby Showers And Home Co... General Electric Gas Ranges Save You Money! New Boogie Wipes Boogie Bundle - Fresh...

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M2-0.4, 8mm Length (Pack of 100)

!±8± Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M2-0.4, 8mm Length (Pack of 100)

Rate : | Price : | Post Date : Mar 18, 2012 19:21:04
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 16mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/4" Length (Pack of 100)
• Metric Black Oxide 12.9 Alloy Steel Socket Head Cap Screw, Hex Socket Drive, M10-1.50, 60 mm Length (Pack of 50)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Steel Hex Nut, DIN, M3-0.5 (Pack of 100)

Ott Lite Desk Lamp Grand Sale The Dryer On Sale New Medela Breast Pump Advanced

Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #10-32, 7/8" Length (Pack of 25)

!±8± Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #10-32, 7/8" Length (Pack of 25)

Brand : Small Parts | Rate : | Price :
Post Date : Mar 08, 2012 00:08:38 | Usually ships in 24 hours

Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #10-32, 7/8" Length (Pack of 25)

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to % of Nickel contained in the material.

Stainless Steel 18-8 denotes 18% chromium and 8% nickel. Stainless Steel 18-8 can be formed and welded. Stainless Steel 18-8 is typically non-magnetic, though the material can become slightly magnetic when cold worked (cold working refers to altering the physical properties of the material without the use of temperature).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

More Specification..!!

Eureka Vacuum Bag Better Than 5 Ft. Long - Gemmy Christmas Airblown Inflatable - Santa And Penguins O... Right Now Saved Roommates Rmk1477scs Batman: The Brave And The Bold Peel And Stick Wall Dec...

Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 5/8" Length (Pack of 100)

!±8±Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 5/8" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 05, 2012 09:47:25
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Thong Suit Best My First Abc Kidsline Grand Sale The Cheapest 1/2" Diameter, 16" Long Flexible Stem Tube Brush With Handle And Dur...

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 16mm Length (Pack of 100)

!±8±Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 16mm Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 03, 2012 12:23:39
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

For Sale Business Duffle... Trina Turk Clearance Sale